Images
|
Description: For burst or time-varying signal only a selected part of a waveform may need to be analyzed. Time-selective spectrum analysis takes specific portions of the time-domain signal for analysis. Flexible triggering from internal source, external source, HP-IB or band-limited IF. The second channel (Option AY7) makes it possible to measure frequency response or perform vector network analysis, and the built-in math functions facilitate measurement calibration and correction. Two-channel statistical measurements such as cross-correlation and coherence can also be made.
The 89410A provides a flexible source for circuit stimulation. Sinewaves, periodic chirps (sinewave sweeps), and pseudo-random noise are available, along with user-definable arbitrary waveforms. The arbitrary waveforms operate on a block of up to 4096 complex points. Any of these signals can be used as a stimulus while spectrum measurements are made elsewhere in the circuit. Source level and dc offset of the pattern are all controllable by the user.
Options Installed
AY5 - Precision Frequency Reference (Cost $774)
AY7 - Second 10 MHz Input Channel To view RF and baseband signals simultaneously or complex (I + Q) signal inputs (Cost $6,535)
AYA - Vector Modulation Analysis Specialized analysis tools and displays for complex modulation formats (Cost $5,497)
AYB - Waterfall and spectrogram (Cost $4,164)
UFG - 4 MB Extended RAM/Additional I/O (Cost $2,080)
|
Interested In Purchasing This Item? Call Us Toll Free (888)449-7653 or email us.
Email This Listing to a Friend
|
