Images
|
Description: The ANT-20SE Advanced Network Tester can be adapted to the latest test requirements and still leave room for handling possible future needs. The instrument thus meets the everchanging requirements of the operators and manufacturers of modern communications networks. The modular hardware and software concept means that the ANT-20 test functions are easily adapted to cover a new scenario.
Always ready for new standards, higher bitrates and the intelligent system components of the future the ANT-20 is at the forefront of network installation and manufacturing applications. Save time and money through automation Test automation is particular important for acceptance measurements and in development and production of network elements. The test sequencer is a test automation software package that runs directly on the ANT-20's built-in PC. Without any programming backround, you can still easily create test sequences to meet your own specific needs.
It supports DS1, DS3, OC-3, and OC-48 data transfers.
This unit has the following applications:
BERT and Performance test for DSn, PDH, SONET and SDH signals support of bit error rate test for all standard bit rates along with performance tests acc. to latest ITU-T Recommendations
Jitter and Wander analysis Generation and analysis of jitter and wander for bit rates from 1.5 Mbit/s to 10 Gbit/s fully compliant to ITU-T Recommendation O.172
Analysis of Tandem Connection Monitorig (TCM) Verifies the proper implementation of TCM in your SDH network
Comprehensive ATM testing Tests ATM networks for correct operation and quality of service (QoS). Depending on the application, the ANT-20 has test solutions for permanent virtual circuits (PVC) and switched virtual circuits (SVC)
Test Automation Time and cost savings through automation. The CATS test sequencer is a test automation software designed to run on the ANT-20's built in PC. It is the ideal tool for automating repeat test procedures
Remote operation Thanks to the Windows-based design, the same software can be run both on the ANT-20 and on a laptop or PC enabling complicated and time consuming tests to be carried out remotely
This unit has the following specifications:
Reference Status Item Number of Master Version 3035-93863.021
Software Version
User Interface: 8.32
Base Module: 8.32
Version
Instrument Version: ANT-20 3035/22
Edition: 3060/02 ANT20se SONET
Existing Options
3035/90.03 - Mapping C4
3035/90.10 - Mapping VT 1.5 SPE
3035/90.34 - Bit Error Test 1.5/45 Mbps
3035/90.93 - OC-48c/STM 4c BERT
3035/91.54 - New STM-16 1310
3035/92.10 - GPIB Remote Control
Base Module
Series: FH-156
Dongle: 01E7678B0700
Edition: 0C01/0260
Interface Edition: 0C01/0163
Flex Mux Edition: 0C01/0656
Optics STM-16 Edition: 0C01/1359
Jitter: Not Installed
This system has the following modules installed:
OC-48c/STM-16 Module
Three Blank Module Slots
This unit has the following hardware configuration:
Operating System: Windows 98 SE
Processor: Pentium II
Hard Drive: 5.6 GB Drive
Memory: 64 MB Installed
Color Touch Screen
|
Interested In Purchasing This Item? Call Us Toll Free (888)449-7653 or email us.
Email This Listing to a Friend
|
