Description: OM-3000 Series dataloggers make taking measurements and downloading them to your PC for further analysis or archiving extremely easy. These dataloggers have a large integral backlit LCD display with graphics capabilities that can be used for on-the-spot measurements for all channels. Input ranges, user-defined session names and sampling intervals are easily programmed via the built-in keypad. With 128K memory, approximately 100,000 individual samples with date/time stamp can be stored in the datalogger for downloading. These dataloggers are powered from a rechargeable NiCad battery pack with a 1500 mA hour rating at 7.2 Vdc. The datalogger will operate for up to 13 hours with backlight off and up to 7 hours with backlight on. The unit may operate continuously if left connected to AC power. Datalogger setup is completely menu driven and is performed from the front panel tactile keypad. Datalogger main menu setup selections include channel setup, measure without recording setup, new recording setup, review data set, download data set, memory management, date and time setup, and also battery capacity check.
This unit has the following features:
24 Bit A/D Converter
J, K, T, and E Thermocouple Types
Four Channels
oC and oF User Selectable
This unit has the following specifications:
Number of Channels: 4 Thermocouple Inputs
Data Storage: 128K (100,000 samples)
Minimum Sampling Interval: 0.6 seconds for 4 Channels
Input Type:
J type T/C: -346 to 2183 oF (-210 to 1195 oC)
K type T/C: -418 to 2498 oF (-250 to 1370 oC)
T type T/C: -418 to 743 oF (-250 to 395 oC)
E type T/C: -418 to 1823 oF (-250 to 995 oC)
Voltage: ± 5 Vdc and ± 30 Vdc (user selectable)
Operating Time: 13 hrs with backlight off, 7 hrs with backlight on
Data Storage Format: up to 50 named data sets, up to 50 recordings per data set, up to 9,999 samples per recording
Includes a shoulder strap and a RS-232 Cable. It does not include a Power Supply, which is 13.5V and 1A.
|
