Images
|
Description: The PTR-200-ARL combines both the fully automatic fiber recoater and the linear fiber proof tester into one single module. Since the same set of fiber holding blocks is used to hold the fiber for both recoating and proof testing, only one fiber loading step is required. Once the fiber is loaded, the entire process is automatic. This makes PTR-200-ARL is an ideal recoating / proof testing system for repetitive, high volume optical fiber production processing. The standard recoat mold size on the PTR-200-ARL is 280mm for nominal 250mm coating. The maximum recoat length is two inches (50mm).
This unit has the following specifications:
Recoating:
Recoat Mold: Quartz
Recoat Diameter: 280 micrometer std. for nominal 250 micrometer fiber
Maximum Recoat Length: 2" (50 mm) for both modules
Recoat Material: UV Curable Acrylate
UV Source: Twelve 10 W halogen lamps
Recoat Injection: Automatic
Proof Testing:
Module: Linear
Load Application: Linear Fiber Clamp
Fiber Clamp Length: 1.5" (38 mm)
Fiber Spacing: 2.9" (74 mm)
Min. Fiber Length Req.: 6" (150 mm)
Maximum Load: 4.5 Lbs; 235 kpsi for 125 micrometer fiber
Accuracy: +/- 2 %
Ramp Rate: Programmable, up to 5 lbs/s
Display Units: lbs, Kg, kpsi, GPa
Includes a Vytran VYT-200-C Integrated Module Controller, a Vytran PTR-200-ARL Base, and a power supply.
|
Interested In Purchasing This Item? Call Us Toll Free (888)449-7653 or email us.
Email This Listing to a Friend
|
