ANRITSU MG9637A TUNABLE LASER SOURCE

This unit has the following specifications:

• Wavelength range: 1500 to 1580 nm
• Wavelength setting resolution: 1 pm
• Absolute wavelength accuracy: < +/- 0.1 nm
• Wavelength stability: < +/- 100 MHz/h
• Wavelength repeatability: +/- 35 pm (80 nm range), Typical: +/- 7 pm (at +/- 3 nm, after calibration)
• Side mode suppression ratio: > 45 dB (1520 to 1570 nm); > 40 dB (1500 to 1580 nm)
• Linewidth (typical value): 700 kHz (coherent control: Off), 50 MHz (coherent control: On)
• Wavelength switching time (typical value): 100 ms/1 nm, 150 ms/10 nm, 500 ms/80 nm
• Output 1: Max Output Power: >–10 dBm (1520 to 1570 nm); >–13 dBm (1500 to 1580 nm)
• Output 1: Min. setting output power: <–20 dBm
• Output 1: Power stability: < +/- 0.01 dB/h
• Output 1: Power flatness: < +/- 0.1 dB
• Output 1: Polarization extinction ratio: > 18 dB
• Output 2 Output power: > – 10 dBm
• Internal modulation: 200 Hz to 20 kHz (square waveform), Duty: 50%
• External modulation: 1 MHz to 3 GHz
• Interface: GPIB, RS-232C
• Main functions: Wavelength calibration, single-step sweep
• I/O Connector: Frequency control input, external modulation input, sweep signal output, sweep trigger signal output, internal modulation sync signal output