CONIC REDUCER ISO 400 FLANGE STAINLESS STEEL KF DN200 CONICAL VACCUM REDUCER

ISO 400 to something like a DN180

Specifications of system:

• Full Height of Unit: 13 5/8"
• Top Diameter Outer: 17.71" (45 cm) (Photograph six) Diameter Inner: 15.74" (40 cm) Thickness of lip: 0.7165" (17.81 mm)
• Bottom Diameter: DN180 9.44" (24 cm) (Photograph 17)

Two support posts on side:

• Upper arm extends about 8.5" from side of unit (Photograph nine)
• Upper arm height from table: ~ 9 3/8" (Photorgaph 10)
• Lower arm height from table: ~ 3 1/2" (Photograph 11)
• Arm post diameter: 0.4935" (12.51 mm) (Photograph 12)

Full dims: 24.5 x 17.5 x 14

Some residue from previous use on the unit (Photograph 15), seams intact and functions well. Equipment is described as best as can be accomplished, please examine all photographs before purchasing.