DMC BT-ST-701 STATIC TORQUE METER ASSEMBLY

• 0-200 in. lbs. torque range
• Increment markings of 5 in. lbs.
• 1 / 4" drive

1/4" to 3/8" Adapter Included

Use

• 1. Turn the bezel clockwise (CW) until light goes on.
• 2. Continue to turn clockwise (CW) and set pointer onto desired torque value.
• 3. Now, turn bezel counter-clockwise (CCW) until pointer is aligned with zero (0).
• 4. When preset as stated above, the signal light goes on when the applied torque equals the wrench setting.
• 5. When pressure on the wrench is released, the pointer will return to zero (0).
• 6. The wrench can be used for repetitive operations without resetting provided the torque on the wrench is released as soon as the signal light goes on. If torque is continued ofter the light goes on, the wrong torque (over torque) will be applied and the wrench will hove to be reset. If in doubt, always reset.