HP AGILENT J2294C ADVISOR MODULE J2300C/D E1 ISDN
Inventory updated: Thu Mar 28 23:21:53 PDT 2024
Ships from: Las Vegas, Nevada USA
🔥This product has been viewed 19 times recently.🔥
Recently Viewed From:
Longwan, China
Friday March 29th 00:03:36 PDT 2024
Fastest shipping: Order now.
Questions ? email@ecrunch.comphone +1 (702) 944-9505
This interface comprises a choice of a plug-in module J2294C suitable for plugging into the J2300C/2300D/J2300E Advisor mainframe and the J2900A High Speed undercradle. The J2294C has RJ-45 and DB-9 connectors which, with converter cables, can connect to 120 Ohm Small Siemens connectors. These modules handle cell and frame based technologies, i.e. ATM, Frame Relay, ISDN, HDLC, X.25, PPP, and BERT. These interfaces do not support Frame Relay CIR and SLA measurements.
The unit has the following features:
- Common to Inputs and Outputs: Connectors: J2294C: balanced 120 Ohm DB-9 and RJ-45
- Line Code: ATM: HDB3 WAN: HDB3, AMI
- Electrical: ITU-T G.703
- Framing: ATM: ITU-T G.704 alternate framing with or without CRC-4
- WAN: ITU-T G.704 alternate framing with or without CRC-4 Fractional channel, any multiple of 64 kbps channel Unframed at 2.048 Mbps
- Cell Mapping: Direct (ITU-T G.804)
- Cell Scrambling: Conforms to ITU-T I.432.1 (x43 + 1) and may be turned on or off
- Inputs: Two ports
- Levels: ITU-T G.703
- Monitor modes: Terminated, 120 Ohm balanced (J2294C) Bridged (High Impedance) Terminated
- Monitor Jack -20 dB and -30 dB
Condition | For parts or not working |
---|---|
Warranty | This unit is sold on an "As-Is" basis with no warranty expressed or implied, no known faults. |