METER MIX PAR 4C 2-PART EPOXY DISPENSER 1:1 SYSTEM ~ PAR4C

The METER MIX PAR 4C can be perfectly used as a 2-part epoxy dispenser for potting applications. The machines are a convincing and economical solution with a high degree of operator functionality. This guarantees robust and proven metering and mixing principles. Furthermore, this all-round model could be also used for the processing
of other two component materials.

System Specifications:

• Mixer Valve: TSV602
• Mixer Size: MS08-32 - High density moulded static mixer nozzles with bell attachment to high pressure metering and mixing
• Pump A: 35.75 mm mild steel
• Pump B: 37.00 mm mild steel
• Hose A: 0.5" x 2.0m PTFE Str x 90
• Hose B: 0.5" x 3.1m PTFE Str x 90

General System Function

• Viscosity acceptance: Up to 500,000 mPa.s (depending upon material thixotropy)
• Shot size: Available from approx. 2.5ml up to 168ml at a ratio of 1:1 by volume
• Cycle Rate: Up to 30 shots per minute (depending upon viscosity)
• Mixing: Disposable Static
• Reservoir Capacity: 6lt (1.58 gal)