PHENIX 6CP100/50-7.5 AC DIELECTRIC HIPOT TEST SET ~ 50 KV 150 MA 100 KV 75 MA

All units in the 6CP line use a combination control and regulator enclosure and a separate high voltage section. The system is equipped with advanced digital metering, and control and protection devices which are easy to use and provide the operator with all necessary information to safely operate the system. The Metering Guard Mode allows accurate measurements of the high voltage test specimen leakage current by bypassing stray capacitive currents. The high voltage section consists of a specially designed oil insulated high voltage transformer characterized by use of an isolating cylindrical housing mounted on a rugged steel base. The high voltage output is equipped with a corona free aluminum shielding electrode. The high quality design and construction is key to the superior partial discharge performance of the 6CP line.

• Output Voltage/Current: 0 to 50kV AC, 150mA; 0 to 100kV AC, 75mA
• Input Voltage: 110 to 120V, 30A, 50/60 Hz
• Compensation: 66% Inductive + Selectable Capacitive Preload
• Metering Accuracy: 0.8% Reading + 0.2% Full scale
• Voltmeter range(s): 0-50 kV/0-100kV
• Currentmeter range(s): 0-200μA /2mA /20mA /200mA
• Output: HV Electrode

I powered this on as shown in the pictures. Main power cable is approximately 29 feet long. Transformer cables are approximately 19 feet long. Field tested prior to listing. Pulled from production due to a change in process. Very clean, primarily used in a laboratory setting.

System will require freight shipment before purchase please contact me about site delivery information; commercial or educational; lift gate or fork lift access; delivery zip code.

Payment must be made with a confirmed bank transfer method only.