THERMO SCIENTIFIC D4641 BARNSTEAD E-PURE ULTRAPURE WATER PURIFICATION SYSTEM

• Certifications/Compliance: CE, CSA
• Conductivity: 0.055μS/cm
• Bacterial Content: <1 CFU/mL
• Feed Water Monitoring: No
• Feedwater Source: Tap or Pretreated
• Flow Rate: Up to 2.5 L/min.
• Product Water Type: Type 1
• Resistivity: 18.2 Mohm.cm at 25°C
• TOC Monitor with UV Intensity Monitoring: No
• Total Organic Carbon: <10 ppb
• Type: Water Purification System
• Feedwater Pressure: 100 psig (6.9 bar)
• Modules: 4
• Particles >0.2µM/mL: <1 μM/mL

Features:

• System achieves resistivities up to 18.2 MΩ-cm and TOC levels below 10ppb.
• Virgin polypropylene water pathways prevent recontamination.
• Recirculation pump continuously recirculates water throughout the entire system to maintain water purity and reduce the quantity of wastewater required for rinse-up.
• System is wall-mountable and completely assembled for easy installation.
• Quarter-turn quick release canisters allow for easy cartridge replacement.
• 0.2μm absolute final filter removes bacteria and particulates that could alter your results.
• Digital resistivity meter is automatically temperature-compensated to 25°C, preventing fluctuating readings due to temperature changes.

Includes Thermo Scientific D2770 Digital Purity Monitor

• Cell Thread Size NPTM in (mm): 1/2 (12.7)
• Resistivity Range megohm-cm: 0.1 - 18.3

System was de-installed from a research facility, filters shown in photographs were used.

System will require shipment via freight, please let me know zip code, is your facility commercial or educational, and if there is access to a fork lift or loading dock