TRANSMATION PNEUCAL IV-B 24454P DIGITAL PNEUMATIC PRESSURE CALIBRATOR

• Calibrate pneumatic instruments: Pneumatic controllers, pressure gauges and pneumatic
• recorders
• Check P/P instruments: Accurately control two pressures
• Test pressure switches: Indicates open and closed
• Test P/I transducers: Read mA or Volts, Built-in 24V loop supply
• Pressure engineering units: PSI, Bar, mbar, kg/cm2, mm Hg, in Hg, kPa,"H2O @4°C, in H2O @20°C, "H2O @60°F, cm H2O @4°C, cmH2O @20°C, mm H2O @4°C & mmH2O @20°C
• Electrical engineering units: mA, % 4 to 20 mA, % 10 to 50 mA and Volts DC
• Accuracy: Pressure: ±0.035% of full scale, mA, %4-20 mA, %10-50 mA: ±0.025% of full scale, V: ±0.025% of full scale

System is not currently calibrated and it does not include system leads.

I powered this on as shown in the pictures. Pulled from production due to a change in process. There is writing on the outside case that resisted removal.