CHROMA 63210 DC ELECTRONIC LOAD 14.5KW 500V 150A 14.5 KW 500 V 150 A 14500 WATT

The Chroma 63210 Electronic Load is designed to test DC power sources, power electronic devices, automotive battery and components testing. The high power ratings, parallel and synchronization capabilities make it the ideal tool for testing high power UUTs such as SMRs, UPSs, batteries, and fuel cells.

150A, 600V, or 14.5kW max. CC, CR, CV, CP load modes Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW) Dynamic loading: Up to 20kHz Only need 1V to draw rated current Programmable slew rate, up to 41A/µS Measurement: Voltage / Current / Power / Resistance Large LED / LCD display External loading waveform simulation Short circuit simulation and short circuit current measurement Full protection: OP, OC, OV, OT and reverse protection Versatile remote controller GPIB & RS-232 interface Surge load capability Battery discharge timer

Model Specifications: Dual Range System:

Low Range

• Power:1450W
• Current: 0 - 15A
• Voltage: 0 - 600V
• Minimum Operating Voltage: 1.5V @ 7.5A; 3V @ 15A

High Range

• Power: 14500W
• Current: 0 - 150A
• Voltage: 0 - 600V
• Minimum Operating Voltage (High Range): 1.5V @ 75A; 3V @ 150A

I powered this on as shown in the pitures. Tested against a variety of Sorensen DC power supplies. Shown is testing at approximately 32 Volts, 100 Amps, 3300 Watts. Please note protective plastic is still over most of front nameplate and display section. Also note some damage to the front and rear top edge as well as some red and black scuff marks from various DC power cables as shown in the pictures. Pulled from production due to a change in process.

Equipment will ship via freight.. Please inform me of information regarding shipping destination, access to fork lift or loading dock, zip code, and commercial or educational facility.

Based on the size and shipping method, equipment will require payment with a confirmed bank method