KEPCO BOP 100-10MG DC POWER SUPPLY 100V 10A 1KW HIGH POWER GPIB RS-232 100 V

Kepco's BOP operate in all four quadrants of the voltage-current axis, therefore their output may swing seamlessly from negative to positive voltage and the output current may also swing from positive to negative values. The result of this is that BOP will function as a source or a sink, meaning it will either deliver power to a load or absorb power from a load. In order to do that, the BOP is built as a power amplifier with a bipolar output, having a frequency bandwidth much larger than a regular power supply. The frequency bandwidth is model and option dependent.

The BOP 1KW has two primary control channels: voltage or current. Either of these may be controlled from full plus setting to full minus setting. To assure that they will intersect in one of the two source quadrants to form a closed boundary as do conventional unipolar power supplies, four auxiliary limit channels are provided: plus voltage, minus voltage, plus current and minus current. These four are controllable from a very small value to the nominal values. Their control does not pass through zero as do the primary voltage and current channels. The intersection of whichever primary control channel is engaged by the load and the respective limit channel does form a closed boundary, and a variable load automatically crosses over from the primary channel to the limit channel.

• DC Output Range: Voltage: 0 to ±100; Current: 0 to ±10
• Closed Loop Gain: Voltage ChanneL: 10.0; Current Channel: 1.0
• Output Impedance: Voltage Mode: Series R mOhm: 10.0 Series L microH: 163
• Output Impedance: Current Mode: Shunt R Ohm: 5000 Shunt C microF: 16
• GPIB and RS 232 digital interfaces plus front panel keypad and color display
• Full 4-quadrant, 1000 watt, source-sink operation.
• Energy recuperation, during sink-mode, through a patented bi-directional PFC circuit.
• Meets the EN61000-3-2 harmonic limits. A built-in EN55011 Class A input EMI filter is provided.
• High efficiency switch-mode operation

I powered this on as shown in the pictures. Includes 12 foot power cord as shown.