PACIFIC POWER SOURCE 140-AMX AC POWER SOURCE 4000 V 135/270V 32/16A 3 PHASE

The Pacific Power Source 140AMX Linear AC Power Source produces low-distortion, high fidelity, output waveforms. The advantage of linear amplification is its ability to faithfully reproduce oscillator waveforms with very high small signal bandwidth and low output distortion. All 140AMX AC sources are equipped with a powerful micro-controller with the ability to operate as a fully integrated test system. This enables a variety of power conditions and transients to be applied to the device under test while metering and analyzing all output performance parameters.

The UPC Controller is a highly versatile one, two, or three phase oscillator/signal generator designed to control the Pacific Power 140AMX AC power source. It is an excellent source of stable AC Voltage over the frequency range of 20 to 5,000 Hz when using the high-end UPC-12 controller.

• AC Power: 4000VA
• Voltage Low/High: 0-135V/0-270V
• Frequency: 20-5000Hz
• Current Low/High: 32A/16A
• Power Factor: 0 to Unity

I powered this on as shown in the pictures. Voltage output verified as shown on both single and split phase operation. Fully tested against an AC load to verify output. Currently wired for 240VAC Δ Delta, but can be reconfigured per manual. (page 60)

Unit will require shipment via freight, please let me know if your facility is commercial or educational and if it has a loading dock or fork lift.

Payment must be received in full with a confirmed bank method.