SCHLEUNIGER UNISTRIP 2100 AUTOMATIC WIRE STRIPPER ~ US 2100 AWG # 10 - 32 STRIP

I powered this on and stripped some wire as shown. On the left, the depth of cut is adjusted every 1/8" with the highest strip length setting. On the right, the depth of cut is set at 1" and strip length is adjusted every 1/8" from the minimum, slightly over 0" as shown, to the highest setting, slightly under 1" as shown. Strip length does not go all the way to 0" or all the way to 1" as shown.

• Wire Size Range: AWG 32 -- 10 (0.03 -- 5.26 mm2)
• Precision of Diameter Setting: 0.01 mm (0.001")
• Maximum Outer Cable Diameter: (partial strip/full strip) 4.7/3.2 mm (0.18"/0.12")
• Strip Length: (Partial strip/fullstrip) 1-25/25 mm (0.04-1"/1")
• Graduated Full Strip Increments: 0.5mm (0.019")
• Cycle Time: (max stripping length) ca. 0.3 s

Some cracks in plastic guard cover (Photograph 4), function unaffected. There would normally be a plastic catch box on the front underneath the strip section, it is not present. Pictures are of actual item. Missing a rubber foot on the bottom as shown.